野花香高清在线观看视频播放免费,国产aⅤ无码专区亚洲av,色偷偷色嚕噜狠狠网站,人人妻人人澡人人爽欧美精品

倘若寬度達到一厘米以上，叫做“大陽角”。大陽角的補膠方法，和小陽角差不多。

If the width is above one centimeter, it is called "big Yang angle". The filling method of Dayang Jiao is almost the same as Xiao Yang Jiao.

上篇文章已經提到，為了節約時間，在此就不說了。由于大陽角的寬度大，就會有光澤度的情況。一般會有兩種情況：

The last article has mentioned that in order to save time, we will not mention it here. Because the width of the big Yang angle is large, there will be glossiness. In general, there are two cases:

第一是電梯套線條廠家出庫時已經把此處做過拋光，要是把多余的膠用刀片處理后，倘若殘留有膠的痕跡，通常是涂上少量VD石材除油除膠劑，用鋼絲棉擦干凈就行。

The first is that the elevator line manufacturers have done the polishing when they are out of the library. If the excess glue is treated with the blade, if there is a trace of the residual glue, it is usually coated with a small amount of VD stone to remove the oil and remove the glue and wipe clean with the steel wire.

第二是電梯套線條廠家出庫時沒做拋光，需要使用手提拋光機和干磨片，磨個五六次即可，最后再用海綿拋收光。這里不需要做出晶面的品質，只需要做出柔潤、有光澤度的效果即可。

Second is the elevator line manufacturers do not polish the outlet, need to use hand-held polishing machine and dry grind, grinding five or six times, and then sponge to throw light. There is no need to make the crystal surface quality, only need to make soft and glossy effect.